Tel.: +961 9 920 699 | Working hours – Mon – Fri: 8:30 – 18:30

Additives

Back to Additives & Treatment

Stop burning oil and smoking engine Reduces oil consumption Improves engine efficiency Improves adherence…
High technology treatment Reduce fuel consumption *cleans fuel injectors Dissolves fuel residue and…
Concentrated antifreeze CORROSION PROTECTION One packet of 3 additives protects the aluminium and its…
REDUCES EXHAUST SMOKE FROM OIL BURNING REDUCES ENGINE NOISE IMPROVES COMPRESSION AND PREFORMANCE DIRECTIONS:ADD…
REPAIR AND PROTECT PREVENTS RUST AND CORROSION STOPS AND PREVENTS LEAK *SEALS PORES AND PROTECTS ALL…
Car care and lubricants All PURPOSE OIL THAT RELEASES AND LOOSENS RUSTY Provides long lasting lubrication…
Helps eliminate downs shifting rough shifting. Slippage sluggish actions reduce frictions Eliminates…
Increases octane level Improves engine performance Eliminates knocking pingin Increases the octane number…
REDUCES EXHAUST EMISSIONS IMPROVES THE OCTANE RATING STABILISES DIESEL CONSUMPTION *Protects the carburation…
Reduce noisy tappets lifters Prevents hydro tappet noise lubrication noise lubrication holes and ducts…
HIGH TECHNOLOGY TREATMENT Sutiable for all power steering systems Smoother and easier steering Stop…
Improves performance Helps to free valves Cleans the whole engine internally combating engine wear and…
Cleans the fuel system Eliminates deposits in combustion chamber Protects tank against rust &corrosion…
Stop fluid loss Keeps seals soft and pliable Formulated to stop and prevent leaks by softening and conditioning…
Quiets noisy valve lifters fast with sludge guard Valve treatment is a special active oil detergent…
Improves performance Helps to free valves Cleans the whole engine internally combating engine wear and…
HELPS STOPS AND PREVENT SYSTEM LEAKS Stops power steering leaks due to drying hardening or shrinking…
ONE SHOT INJECTOR CLEANER REDUCE FUEL CONSUMPTION CLEANS INJECTORS IN ONE APPLICATION LUBTICANTS AND…
OIL TREATMENT-VICOSITY IMPROVER 300ML

OIL TREATMENT-VICOSITY IMPROVER 300ML

Stop burning oil and smoking engine

Reduces oil consumption

Improves engine efficiency

Improves adherence of oil film between piston rings and cylinder walls

Consumption and motor wear in old motors

Seals rings to improve compression

Directions:add 1 bottle to the motor oil at every oil change for motors with extreme wear or high

mileage and uses excessive quantity of oil add two bottles

For normal use 1 bottle treats a crank case of 4 to 6 litters

Injector Cleaner Gasoline 300ml

Injector Cleaner Gasoline 300ml

High technology treatment

Reduce fuel consumption

*cleans fuel injectors

Dissolves fuel residue and deposits which block the injection system

Absorbs water condensation in the tank

Facilitates start up

Directions:add the contents to the fuel tanks

Treatment for 30 to 50 litters of gasoline

For normal use 1 bottle every 5000km 

Universal Antifreeze concentrated

Universal Antifreeze concentrated

Concentrated antifreeze

CORROSION PROTECTION

One packet of 3 additives protects the

aluminium and its alloys from 3 basic risks:

+ Pitting.

« Cavitation of the water pump

+ Corrosion in welds

A packet of 3 different additives protects iron,

steel and other alloy parts and prevents the

formation of acids by holding the pH stable

A final additive protects the parts made from

copper and derived alloys. 

Stop Smoke 300ml

Stop Smoke 300ml

REDUCES EXHAUST SMOKE FROM OIL BURNING

REDUCES ENGINE NOISE

IMPROVES COMPRESSION AND PREFORMANCE

DIRECTIONS:ADD CONTENTS TO ENGINE OIL WHEN THE ENGINE TO WARM

ADD TO ENGINE OIL ‐DO NOT ADD TO FUEL TANK

USE AT OIL CHANGE OR BETWEEN OIL CHANGES AS NEEDED

FOR NORMAL USE 1 BOTTLE TREARTS 3‐5 LT OF ENIGINE OIL

JUST ADD TO MOTOR OIL REDUCES ENGINE WATER AND NOISE

STOP BURNING OIL

INCREASES OIL PRESSURE

IMPROVES PREFORMANCE 

Radiator Stop Leak 300ml

Radiator Stop Leak 300ml

REPAIR AND PROTECT

PREVENTS RUST AND CORROSION

STOPS AND PREVENTS LEAK

*SEALS PORES AND PROTECTS ALL THE COOLING SYSTEM.

DIRECTIONS FOR USE: Before use it is recommended to clean radiator with Kroll radiator flush.

Shake the product and pour all the solid particules into the radiator (not in the expansion tank)

Run the engine about 15minutes if necessary, top up with kroll cooling liquid

Gas treatment -power booster 300ml

Gas treatment -power booster 300ml

Release &Loosen 300ml

Release &Loosen 300ml

Car care and lubricants

All PURPOSE OIL THAT RELEASES AND LOOSENS RUSTY

Provides long lasting lubrication and protection against corrosion for locks cables weapons tools and

small mechanism

Suitable for sewing machine(singer)

Automatic-Transmission-Treatment-300ml

Automatic-Transmission-Treatment-300ml

Helps eliminate downs shifting rough shifting. Slippage sluggish actions reduce frictions

Eliminates hesitating and between speeds lurching

Directions: for corrective maintenance add one container and operate vehicle

Normally drain after 5000km

For preventive use 1 bottle every 5000km

Octane Booster -Power Improver 300ml

Octane Booster -Power Improver 300ml

Increases octane level

Improves engine performance

Eliminates knocking pingin

Increases the octane number by 2 to 5 points

Eliminates condensation of water in the entire supply system

To be used in leaded or unleaded petrol injectors or carburetor

Directions for use: add to the fuel tank before filling up treats 30 to 60 litters

For normal use 1 bottle every 5000km 

Diesel-treatment-octane-improver-300ml

Diesel-treatment-octane-improver-300ml

REDUCES EXHAUST EMISSIONS

IMPROVES THE OCTANE RATING

STABILISES DIESEL CONSUMPTION

*Protects the carburation system from rust &corrosion.

*Eliminates deposits in combustion chamber &valves.

Directions: Add to the Fuel tank preferably before filling up. 1bottle treats 30 to 60 liters. 

Hydro Lifter Tappet Treatment 300ml

Hydro Lifter Tappet Treatment 300ml

Reduce noisy tappets lifters

Prevents hydro tappet noise lubrication noise lubrication holes and ducts in the oil circuits are cleaned.

Secures optimal hydro tappet performance.

Increases the reliability and travel comfort of the vehicle

Directions: Pour entire contents into cracked case

Bottle contents are sufficient for up to 4-liter motor oil. 

Power Steering Treatment 300ml

Power Steering Treatment 300ml

HIGH TECHNOLOGY TREATMENT

Sutiable for all power steering systems

Smoother and easier steering

Stop annoying squeals and squeals

Non corrosive,non foaming and intermixes completely for smoother and easier steering

Directions:for corrective maintenance add one container and operate vehile .

Normally drain after 5000km

 For preventive use,1 bottle every 10000km 

Hydrolic Fluid 68

Hydrolic Fluid 68

Engine Flush 300ml

Engine Flush 300ml

Improves performance

Helps to free valves

Cleans the whole engine internally combating engine wear and improving performance and power

Directions: add contents to engine oil and run engine for 5 minutes or not more than 100km and drain

oil whilst engine is hot replace oil filters and oil

For full satisfaction use before each oil change

Carburator-Cleaner-300ml

Carburator-Cleaner-300ml

Cleans the fuel system

Eliminates deposits in combustion chamber

Protects tank against rust &corrosion

*Quickly dissolves gums varnish sludge and carbon deposits that build up and cause hard starting and

waste fuel

*eliminates water from the fuel system.

Directions: add the contents to the fuel tank before 40 to 60 liters

For normal use ,1bottle ever 5000km.

Automatic-Transmission-Stop-Leak-300ml

Automatic-Transmission-Stop-Leak-300ml

Stop fluid loss

Keeps seals soft and pliable

Formulated to stop and prevent leaks by softening and conditioning seals. Stops leaks caused by

hardened o rings and seals. Helps to prevent leaks and seepage

Directions: add do not over fill, if leak persist after 300 to 500km add a second bottle if leaks still

continues seal may need to be replaced 

Valve Treatment 300ml

Valve Treatment 300ml

Quiets noisy valve lifters fast with sludge guard

Valve treatment is a special active oil detergent it is a powerful blend of quick acting solvent it is normally

quiets valve lifter and reduce fuel consumption

Directions: pour entire contents into crankcase.

Bottle contents are sufficient for up to 4-liter motor oil. 

Engine Flush U.S. GAL

Engine Flush U.S. GAL

Improves performance

Helps to free valves

Cleans the whole engine internally combating engine wear and improving performance and power

Directions: add contents to engine oil and run engine for 5 minutes or not more than 100km and drain

oil whilst engine is hot replacing oil filters and oil

For full satisfaction use before each oil change

Power Steering Stop Leak 300ml

Power Steering Stop Leak 300ml

HELPS STOPS AND PREVENT SYSTEM LEAKS

Stops power steering leaks due to drying hardening or shrinking of seals

Reduces bearing piston value wear and noise

Keeps power steering unit operating at peak efficiency

Directions: add do not over fill, if leak persist after 300 to 500km add a second bottle if leaks still

continues seal may need to be replaced

Injector Cleaner Diesel 300ml

Injector Cleaner Diesel 300ml

ONE SHOT INJECTOR CLEANER

REDUCE FUEL CONSUMPTION

CLEANS INJECTORS IN ONE APPLICATION

LUBTICANTS AND CLEANS FUEL SYSTEM

GAURANTEEED TO IMPROVE PREFORMANCE

ADD THE CONTENTS 300ML CONTAINER TO THE FUEL TANK

IN ONE QUICK EASY APPLICATION

FOR THE BEST RESULTS ADD PRIOR TO FILL UP

FOR NORMAL USE 1 BOTTLE TREATS 70‐100LY.OF DIESEL DUEL